GLP-TDS-100 Clamp On Type Ultrasonic Flow Meter:
DN25
DN15
DN50
I: Features
1.GLP-TDS-100F1 wall mounted(standard)ultrasonic flow meter
- Display: English or Chinese ( changeable )
- Compact structure, strong, international advanced die-casting aluminum chassis
- Weight:2.5Kg
- With heat display function(optional)
- Voltage : AC220V、DC24V (optional)
2.GLP-TDS-100F2 wall mounted(explosion-proof type)ultrasonic flow meter
- Display: English or Chinese ( changeable )
- Compact structure, strong, international advanced die-casting aluminum chassis
- Weight:7Kg
- Explosion proof : dⅡBT4
- With heat display function(optional)
- Voltage : AC220V、DC24V (optional )
3.GLP-TDS-100F3 Fixed plate type ultrasonic flow meter
- Display: English or Chinese ( changeable )
- Conform to the national standard of the chassis(Plane frame size 80×160mm)
- Weight: 2Kg
- With heat display function(optional)
- Voltage : AC220V、DC24V (optional )
4.GLP-TDS-100Y Integrated type ultrasonic flow meter
- Display: English or Chinese ( changeable )
- Magnetic type buttons window operations
- With heat display function(optional)
- Data is not lost without electricity for 100000 hours
- Voltage : AC220V、DC24V
II:Basic Technical Parameters:
- Accuracy better than 1%, the repeatability of 0.5%
- Measurement cycle:500 ms(2 times per second, 128 groups of data per cycle)
- Backlit LCD and display instantaneous flow and cumulative amount at the same time, the instantaneous heat and accumulative total quantity of heat, velocity, time and other data
- Output : 4~20mA or 0~20mA,impedance : 0~1K,accuracy: 0.1%
- It can measure the heat or changeable from flow rate to heat.
- It can record before 512 days and 128 month in automatically, also the positive/negative/net cumulative flow in the first 10 years.
- It can record before 30 times calls and interruption time flow rate automatically, also can fill quantity by manual and automatically, reducing the loss of user traffic, also can be read through the Modbus protocol.
- It can program batch (quantitative) controller, fault self-diagnosis function.
- It can implement software upgrade by transmitted via E-mail to the code file.
- Communication protocol;Modbus protocol、M-Bus protocol、FuJI and compatible with the domestic similar products of other manufacturers communication protocol.
- Signal input:three road 4 ~ 20 ma analog input, accuracy 0.1%, it can input pressure, liquid level, temperature signal; Two way three-wire system PT100 platinum resistance, it can display instantaneous and accumulation of heat
- Output:one road insolated RS485 output, one road 4~20mA or 0~20mA output、one way isolation OCT(pulse width between 6 ~ 1000 ms programmable, 200 ms) by default, a relay output.