Guided Wave Radar Level Meter

Guided Wave Radar Level Meter:

GRD801

MEDIUM :Liquid, solid powder.
APPLICATION:liquid and solid powder measurement and complex process conditions.
EXPLOSION  LEVEL: Exd ⅡC T6 Gb
RANGE:Liquid 30m/solid 15m.
FREQUENCY:500MHz-1.8GHz
ANTENNA :single cable or single rod antenna.
ACCURACY:±3mm
TEMPERATURE:- 40 ~250 ℃
PRESSURE:-0.1 ~ 4.0 MPa
OUTPUT: (4-20)mA/HART
VOLTAGE: two wire ( DC24V ) /four wire ( DC24V/AC220V)
PROCESS CONNECTION : thread/flange(optional)

GRD802

MEDIUM : liquid, especially the corrosive liquid.
APPLICATION:acid, alkali or other corrosive medium.
EXPLOSION  LEVEL: Exd ⅡC T6 Gb
RANGE:rod 6m/cable 20m.
FREQUENCY:500MHz-1.8GHz
ANTENNA :all four fluorine seal cable or rod antenna.
ACCURACY:±10mm
TEMPERATURE:- 40 ~150 ℃
PRESSURE:-0.1 ~ 1.6 MPa
OUTPUT: (4-20)mA/HART
VOLTAGE: two wire ( DC24V ) /four wire ( DC24V/AC220V)
PROCESS CONNECTION : thread/flange(optional)

GRD803

MEDIUM : Low dielectric liquid and solid
APPLICATION:cement silo powder level measurement; ash powder measurement.
EXPLOSION  LEVEL: Exd ⅡC T6 Gb
RANGE:30m.
FREQUENCY:500MHz-1.8GHz
ANTENNA :Double wire antenna.
ACCURACY:±5mm
TEMPERATURE:- 40 ~250 ℃
PRESSURE:-0.1 ~ 4 MPa
OUTPUT: (4-20)mA/HART
VOLTAGE: two wire ( DC24V ) /four wire( DC24V/AC220V)
PROCESS CONNECTION : thread/flange(optional)

GRD804

MEDIUM : Liquid, especially liquid of low dielectric constant
APPLICATION:deionized water, deaerated water liquid measurement
EXPLOSION  LEVEL: Exd ⅡC T6 Gb
RANGE:6m.
FREQUENCY:500MHz-1.8GHz
ANTENNA :Concentric tube antenna
ACCURACY:±3mm
TEMPERATURE:- 40 ~250 ℃
PRESSURE:-0.1 ~ 4 MPa
OUTPUT: (4-20)mA/HART
VOLTAGE: two wire ( DC24V ) /four wire(DC24V/AC220V)
PROCESS CONNECTION : thread/flange(optional)

GRD805

MEDIUM : Liquid, especially in the environment of high temperature and high pressure liquid
APPLICATION:sealed tank, high pressure liquid measurement.
EXPLOSION  LEVEL: Exd ⅡC T6 Gb
RANGE:6m.
FREQUENCY:500MHz-1.8GHz
ANTENNA :Single rod or cable antenna.
ACCURACY:±10mm
TEMPERATURE:- 40 ~400 ℃
PRESSURE:-0.1 ~ 40 MPa
OUTPUT: (4-20)mA/HART
VOLTAGE: two wire ( DC24V ) /four wire ( DC24V/AC220V)
PROCESS CONNECTION : thread/flange (optional)